|
The Direct Connect 4 modules features 4 relay controlled outlets each capable of switching 120V at 8 Amps. The DC4 enables a very reliable hardwired connection between the AquaController and all controlled devices - X10 interference problems caused by noisey electronic ballasts (i.e. Blueline) are eliminated. NOTE: Due to the high inrush current (greater than 40 Amps) on ICECAP ballasts, it is recommended that the DC4HD (heavy duty) is used instead. - four 120V Outlets (Max 8 Amps, total current must be less than 10 Amps).
- High reliability direct wired connection to the AquaController.
- Can be used with electronic ballasts which cause X10 interference.
- Up to 5 DC4s can be daisy chained for up to 20 switched outlets.
- X10 Control Interface can be last device in chain (Simultaneous X10 and hardwired control)
- Fuse Protected
- 4 Mounting Holes for easy installation
- Not recommended for use with ICECAPTM ballasts
 |
